GL's newest T3 (DS3) E3 T1 E1 Ethernet Analyzer Pod is one of the smallest and lightest (weighing only 1.75 lbs) analyzer units in the world. The pod when connected to Notebook PC is capable of capturing two full T3 (DS3) / E3 data streams, dropping and inserting T1 or E1, full Ethernet analysis, and HDLC, ATM, FR, and PPP Analysis. GL's T3 E3 T1 E1 Ethernet Analyzer can also be used in conjunction with GL's Laptop T1 / E1 analyser for individual T1 (DS1), E1, DS0, and analogue analysis.

Capabilities

o One of the smallest and lightest T3 (DS3) /E3, T1/E1 and Ethernet analysis platforms with dual data stream capture capability.

o Multiple interfaces for analysis (T3 (DS3) /E3, T1/E1 and Ethernet) and control (USB and Ethernet) to support a wide array of testing scenarios.

o Software selectable T3 (DS3) / E3 interface along with T1 (DS1) and E1 Drop and Insert.

o Dual T3/E3 Receivers and Transmitters for non-intrusive and intrusive testing of both eastbound and westbound signals at the same time.

o Comprehensive T3, E3, T1, E1 and Ethernet testing solution

o General T3 (DS3) /E3 signal testing capabilities

• Alarms – Monitoring and Logging
• Monitor T3 (DS3) /E3 frequency, line level and various errors.
• Alarm Generation and Error Injection
• Decode and Simulate Far End Alarm Channel (FEAC) messages.
• T3 (DS3) /E3 error counters
• Dual BERT and G.821 Analysis

 

o Channelized (Structured) Testing

• Multiplex / De-multiplex T1 (DS1) /E1 signals (Drop and Insert).
• Receivers for bidirectional monitoring with Dual T1 (DS1) / E1 drop.
• Transmit multiplexed externally inserted or internally generated T1/E1 streams into T3 (DS3) /E3.
• Stress test M13 (E13) multiplexers and 3/1 Digital cross connect systems.
• Dual channel drop and insert of T1/E1 signals from any one of the T3 (DS3) /E3 signals.
• Broadcast or loopback individual T1s/E1s within the T3 (DS3) /E3.
• Generates 28 T1s or (21 E1s) signals within the T3 (DS3) or 16 E1s within E3 output.

o Unchannelized (Unstructured) Testing

• WAN Testing
• Protocol testing for ATM, PPP, HDLC, and Frame Relay
• Transmit / Verify HDLC frames with user defined headers

o  Simultaneously record / playback the entire T3 (DS3) /E3 in framed or unframed modes up to hard disk capacity.

o  Flexible clocking - internal, recovered (from T3 (DS3) /E3, T1 (DS1) or E1) and external.

o  Scripting and Automation through GL’s well-known Windows Client Server (WCS) approach.

o  Monitor / Manage the Analyzer remotely via Ethernet port (future enhancement).         

T3/E3/T1/E1 Analyzer Datasheet